He-Ne Power Supply For Laser Tubes

He-Ne Power Supply for Laser Tubes

He-Ne Power Supply for Laser Tubes

 1) Main Features:

Specificity: It is designed exclusively for engraving machines and can be applicable to 40W and 30W laser tube.

Powerful Features and High Integrity: It makes the laser power supply, auxiliary power of driving control board and drive motor integrate in one board, so as to reduce external lead and strengthen the anti-interference ability.

Advanced Technology: The power adopts Soft Switch Technology, so dramatically increase the efficiency of the power supply, boost reliability of the power supply and also lengthen the life of laser.

High Security: The input and output of power supply are separated completely to avoid electric shock.

Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.

Easy Control of Laser Power: The laser power conversion can be controlled by a potentiometer.

The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.

Application: Engraving, seal-cutting, etc.

2. Specification:

Input	Input Voltage	AC220V or AC110V(to be specified when placing order)
	AC frequency	47-440HZ
	Cold Surge Current	≤60A(AC220V Input)	≤30A(AC110 Input)
	Current Leakage	≤0.7mA(AC220V Input)	≤0.4mA(AC110V Input)
Output	Maximum Output Voltage	DC 25KV	DC 5V	DC 24
	Maximum Output Current	DC 20mA	3A	2A
Efficiency	≥90%(full load)
Mean Time Between Failure (MTBF)	≥10000H
Response Speed	≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Control Interface	TTL level switch control (details refer to the control terminal specification)
Withstand Voltage	Input-Output, Input-Shell: AC1500V 10mA 60S
Protection	can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environment	Operating Temperature:-10~40),Relative Humidity (RH)≤90%
Cooling Way	Natural air cooling
Dimension	L×W×H=210*180*60(mm)

He-Ne Power Supply For Laser Tubes