Products

HY-HVCO2- C80 80w accuracy power supply for medical machine

Product Detailed

1 special for yueming machine 2remarkably reduce spot diameter 3Excellent low power control 4easily controlled by TT

Main Features

1.This power supply can remarkably reduce spot diameter, and make carving and engraving greater fine.

2.This type new function especially is applied for adhesive sticker, score and figure engraving.

Excellent low power control: This power supply has special advantage for low power control. It can stably control laser power even in 0-7mA.

3. Easy Control: The start and stop of laser can be easily controlled by TTL level.

4. The power supply has output open circuit protection.

5. This power supply has TTL signal indication, water Through signal indication and laser output indication..

6. This power supply has the BUTTON to test it work properly.

7.Application: Carve and score adhesive sticker. Carve and engrave acrylic, fabric, double-color sheet and rubber.

2. Specification

Input	Input Voltage	AC220V or AC110V(to be specified when placing order)
	AC frequency	47—440HZ
	Cold Surge Current	≤60A(AC220V Input)	≤30A(AC110 Input)
	Current Leakage	≤0.7mA(AC220V Input)	≤0.4mA(AC110V Input)
Output	Maximum Input Voltage	DC 40KV
	Maximum Output Current	DC 25mA
Efficiency	≥90percent (full load)
Mean Time Between Failure (MTBF)	≥10000H
Response Speed	≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Control Interface	TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage	Input-Output, Input-Shell, AC1500V 10mA 60S; Output negative is connected with machine shell.
Protection	can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environment	Operating Temperature,-10~40°C,Relative Humidity (RH)≤90percent
Cooling Way	Force-Air Cooling (FAC)
Dimension	L×W×H=28017397(mm)